Proper maintenance of the component tester can extend the use time
Release time:
2021-07-22 17:47
At present, this component testing instrument is of special and general type. At present, the technology is relatively mature and has been used in many industries. Due to the high degree of automation, if the correct maintenance is not carried out, the accuracy of the end will be affected. Therefore, we need to do the following work well.
component tester maintenance:
1. The mobile capacitor tester and other component testers should be handled with light, and the test line and fixture should be reset after each startup. High-precision instruments should be kept away from the interference of strong magnetic fields as far as possible, and special patch fixtures or special fixtures should be ordered for patch components.
2. At present, it is basically possible to connect automatic equipment to realize automatic testing, but the ground wire must be connected well, otherwise it may cause some uncertain interference. Although the anti-impact protection design has been made for all component testing instruments, it is still necessary to ensure that the capacitor is not charged before testing the capacitor, which can ensure stable and accurate testing and long service life of the instrument.
3. Maintenance of component tester: In order to improve the testing speed and service life of the instrument, it is recommended to select the measuring range of the instrument as locking during testing. If testing magnetic inductance, attention should be paid to the consistency of internal resistance and level, because inductance is sensitive to current.
4. In order to ensure the accuracy and consistency of the test results, it is necessary to maintain good conductivity on the surface of the pins of the tested products. It is recommended to select a special instrument to test the super-large capacitance and the TH2615F of Tonghui.
Through proper maintenance, the use of component testers such as capacitance testers can be made more agile, and the use time will be longer, so that it will not be useless for a while, and it can also reduce the cost of an enterprise.
